S.R.L.
PROFESSIONAL GLUE GUNS
Professional electric glue
guns machines carry out a very important role in achieving a good result. In
fact, all hot-melt adhesives reach their maximum efficiency if applied at the correct
temperature. For this reason, it is advisable to always use a good quality
machines, which is able to maintain the extrusion temperature within safety
levels. The quality of the materials and the technological solutions used, are
fundamental for machinery that has to reach and maintain for hours temperatures
of around 200°C. The diameter of the stick identifies the guns. The Stick Col
s.r.l. Markets all machines except those of 26-mm. diameter. That of 15 mm. and
7,5 mm. may not be in stock. All the proposed machinery has been chosen from
the most reliable on offer. The following tables show the available machines.
Glue
Guns for 12 mm. diameter sticks:
|
Type |
Power (Watt) |
Thermostat(*) |
Supplied (Volt) |
Interchangeable nozzle |
||
|
50 |
M |
220 |
Yes |
|||
|
100 |
M |
220 |
Yes |
|||
|
150 |
M |
220 |
Yes |
|||
|
150 |
M/R |
220 |
Yes |
|||
|
500 |
E |
220 |
Yes |
|||
|
220 |
M |
220 |
Yes |
|||
|
125 |
L |
125/240 |
Yes |
|||
Glue
Guns for 15 mm. diameter sticks:
|
Type |
Power (Watt) |
Thermostat(*) |
Spplied (Volt) |
Interchangeable nozzle |
|
500 |
E |
220 |
Yes |
|
|
500 |
E |
220 |
Yes |
Glue
Guns for 43 mm. diameter sticks:
|
Type |
Power (Watt) |
Thermostat(*) |
Spplied (Volt) |
Interchangeable nozzle |
|
300 |
E |
240 |
Yes |
|
|
500 |
E |
240 |
Yes |
|
|
300 |
E |
240 |
Yes |
- (1):
This machinery may be used hot-melt in chips or in all formats thet are
not over a diameter of 43-mm. and a length of 120-mm.
- Other
glue guns with different characteristics of capacity and power are
available on request.
- (*)Legenda:
|
L-Non linear Heater |
M-Meccanic Thermostat |
R-External Temp. Control |
E-Electronic Temp. Control |
The above data is to be conYesdered as merely an
identification. Thus, the result must be confirmed by specific test for each
type of use.
Write to: